Kenwood Food Processor BLX50 User Manual

BLX50 series  
 
Use your blender for soups, drinks, pâtés, mayonnaise,  
breadcrumbs, biscuit crumbs, chopping nuts and  
crushing ice.  
This appliance is not intended for use by persons  
(including children) with reduced physical, sensory or  
mental capabilities, or lack of experience and  
knowledge, unless they have been given supervision or  
instruction concerning use of the appliance by a person  
responsible for their safety.  
Children should be supervised to ensure that they do  
not play with the appliance.  
Only use the appliance for its intended domestic use.  
Kenwood will not accept any liability if the appliance is  
subject to improper use, or failure to comply with these  
instructions.  
before using your Kenwood appliance  
Read these instructions carefully and retain for future  
reference.  
Remove all packaging and any labels.  
Wash the parts: see ‘care and cleaning’.  
safety  
Switch off and unplug:  
before fitting or removing parts;  
when not in use;  
before cleaning.  
before plugging in  
Make sure your electricity supply is the same as the  
one shown on the underside of the appliance.  
Always unplug the appliance before putting your hands  
or utensils in the goblet.  
Always take care when handling the blade assembly  
and avoid touching the cutting edge of the blades  
when cleaning.  
Only operate the blender with the lid in place.  
Only use the goblet with the blade assembly supplied.  
Never let the power unit, cord or plug get wet.  
Never use a damaged appliance. Get it checked or  
repaired: see ‘service and customer care’.  
Never use an unauthorised attachment.  
Liquids should be allowed to cool to room temperature  
before blending.  
Important - UK only  
The wires in the cord are coloured as follows:  
Blue = Neutral  
Brown = Live.  
The appliance must be protected by a 13A approved  
(BS1362) fuse.  
Note:  
For non-rewireable plugs the fuse cover MUST be  
refitted when replacing the fuse. If the fuse cover is lost  
then the plug must not be used until a replacement can  
be obtained. The correct fuse cover is identified by  
colour and a replacement may be obtained from your  
Kenwood Authorised Repairer (see Service).  
If a non-rewireable plug is cut off it must be  
DESTROYED IMMEDIATELY. An electric shock hazard  
may arise if an unwanted non-rewireable plug is  
inadvertently inserted into a 13A socket outlet.  
This appliance conforms to EC directive 2004/108/EC  
on Electromagnetic Compatibility and EC regulation no.  
1935/2004 of 27/10/2004 on materials intended for  
contact with food.  
Never leave the appliance unattended when it is  
operating.  
When removing the blender from the power unit:  
wait until the blades have completely stopped;  
don’t accidentally unscrew the goblet from the blade  
assembly.  
Never run the blender empty.  
Never blend more than the maximum capacity stated in  
the recommended function selector chart.  
To ensure long life of your blender, do not run it for  
longer than 60 seconds.  
Smoothie recipes - never blend frozen ingredients that  
have formed a solid mass during freezing, break it up  
before adding to the goblet.  
Don’t use the blender as a storage container. Keep it  
empty before and after use.  
Always use the blender on a secure, dry level surface.  
Never place this appliance on or near a hot gas or  
electric burner or where it could touch a heated  
appliance.  
Misuse of your blender can result in injury.  
2
 
4 Put your ingredients into the goblet.  
5 Clip the lid seal onto the underside of the lid.  
6 Fit the filler cap to the lid.  
7 Fit the lid by pushing down until secure.  
8 Place the blender onto the power unit.  
key  
filler cap  
lid  
lid seal  
goblet  
sealing ring  
blade unit  
base  
power unit  
function selector  
pulse button  
on/off button  
cord storage  
The appliance won’t work if the blender is  
incorrectly fitted.  
9 Select a speed (refer to the function selector chart).  
hints  
To blend dry ingredients - cut into pieces, remove the  
filler cap, then with the machine running, drop the  
pieces down one by one. Keep your hand over the  
opening. For best results empty regularly.  
The processing of spices is not recommended as they  
may damage the plastic parts.  
When making mayonnaise, put all the ingredients,  
to use your blender  
1 Fit the sealing ring into the blade unit - ensuring  
the seal is located correctly.  
except the oil, into the blender. Remove the filler cap.  
Then, with the appliance running, add the oil slowly  
through the hole in the lid.  
Leaking will occur if the seal is damaged or  
incorrectly fitted.  
Thick mixtures, e.g. pâtés and dips, may need scraping  
2 Clip the blade unit into the base .  
3 Screw the goblet onto the blade assembly in a  
clockwise direction - ensuring that the blade assembly  
is fully tightened.  
down. If the mixture is difficult to process, add more  
liquid.  
function selector chart  
pre-program  
setting  
usage  
max qty  
Drinks and thick mixes ie pâtés  
Frothing milk  
1.6 litres  
800 mls  
Smoothie drinks  
1 litre liquid  
Place the fresh fruit and liquid ingredients in first (includes yoghurt,  
milk and fruit juices).  
Then add ice or frozen ingredients (includes frozen fruit, ice  
or ice cream)  
All types of soup mixes  
1.6 litres  
Liquids should be allowed to cool to room temperature  
before blending.  
Dips, fruit and vegetable purées (add liquid if difficult to process).  
Chopping e.g. nuts, breadcrumbs and biscuit crumbs etc.  
Mayonnaise  
3 eggs  
450 mls oil  
Ice Crushing  
12 cubes  
Automatic pulsing action  
3
 
care and cleaning  
service and customer care  
Always switch off, unplug and dismantle before  
If the cord is damaged it must, for safety reasons, be  
cleaning.  
replaced by KENWOOD or an authorised KENWOOD  
repairer.  
Empty the goblet before unscrewing it from the blade  
unit.  
UK  
The goblet can be washed in your dishwasher.  
If you need help with:  
power unit  
using your appliance or  
Wipe with a damp cloth, then dry.  
servicing, spare parts or repairs (in or out of guarantee)  
Don’t immerse the power unit in water.  
Wrap excess cord around the bottom of the power unit  
.  
call Kenwood customer care on 023 9239 2333. Have  
your model number (ie BLX50) and date code  
(4 digit code ie 6T41) ready. They are on the  
underside of the power unit.  
blade assembly  
spares and attachments  
1 Unscrew the base from the goblet in an anticlockwise  
direction.  
2 Remove the blade unit from out of the base by pushing  
call 0870 2413653.  
other countries  
Contact the shop where you bought your appliance.  
up from underneath.  
Care should be taken when removing the  
blade unit from the base.  
3 Remove and wash the sealing ring.  
4 Don’t touch the sharp blades – brush them clean using  
hot soapy water, then rinse thoroughly under the tap.  
Don’t immerse the blade unit in water.  
5 Leave to dry upside down.  
IMPORTANT INFORMATION FOR CORRECT  
DISPOSAL OF THE PRODUCT IN ACCORDANCE  
WITH EC DIRECTIVE 2002/96/EC.  
At the end of its working life, the product must not be  
disposed of as urban waste.  
It must be taken to a special local authority differentiated  
waste collection centre or to a dealer providing this service.  
Disposing of a household appliance separately avoids  
possible negative consequences for the environment and  
health deriving from inappropriate disposal and enables  
the constituent materials to be recovered to obtain  
significant savings in energy and resources. As a reminder  
of the need to dispose of household appliances  
separately, the product is marked with a crossed-out  
wheeled dustbin.  
lid  
Remove the lid by pushing the tab up .  
Unclip the seal before cleaning the lid .  
Wash both parts by hand, then dry.  
other parts  
Wash by hand, then dry.  
4
 
guarantee (uk only)  
carrot and coriander soup  
25g butter  
If your blender goes wrong within one year from the  
date you bought it, we will repair it (or replace it if  
necessary) free of charge provided:  
you have not misused, neglected or damaged it;  
it has not been modified (unless by Kenwood);  
it is not second-hand;  
50g onion chopped  
1 clove garlic crushed  
1
700g carrot cut into 1 ⁄2 cm cubes  
cold chicken stock  
10-15ml (2-3tsp) ground coriander  
salt and pepper  
it has not been used commercially;  
you have not fitted a plug incorrectly; and  
you supply your receipt to show when you  
bought it.  
1 Melt the butter in a pan, add the onion and garlic and  
fry until soft.  
2 Place the carrot into the liquidiser, add the onion and  
garlic. Add sufficient stock to reach the 1.6 L level  
marked on the goblet. Fit the lid and filler cap.  
3 Blend on maximum speed for 5 seconds for a coarse  
soup or longer for a finer result.  
This guarantee does not affect your statutory rights.  
4 Transfer the mixture to a saucepan, add the coriander  
and seasoning and simmer the soup for 30 to 35  
minutes or until cooked.  
5 Adjust the seasoning as necessary and add extra liquid  
if required.  
5
 
6
 
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK  
18335/3  
 

Indesit Washer Dryer WE 14S User Manual
Insignia Computer Drive NS PCH5421 User Manual
JBL Home Theater System L830 User Manual
John Deere Grinder AT 3303 J User Manual
JVC DVD Player XV NK38SL User Manual
JVC Speaker RV B99 User Manual
Kenmore Vacuum Cleaner 11625812 User Manual
Kenwood Food Processor FP910 series User Manual
KitchenAid Garbage Disposal KCDS075T0 User Manual
Kompernass Glue Gun PHKP 500 User Manual